PL10D Double Solar Powered Obstruction Light

Double solar powered obstruction light

PL10D - 10 Candela Double Solar Powered Obstruction Light

Based on our PL10, PL10D is a "twin" model which can be working synchronization. An internal solar panel comes with each single light of PL10D, provides power supply to the light, which makes PL10D solar aviation obstruction lights a self-contained and easy-care light unit. With the solar function, the light is easy to deploy to almost any condition and any emergency case. The robust body surface coating provides good protection against harsh environments.

PL10D is equipped with an 8Ah NiMH rechargeable battery for each single which could power the light for up to 20 days in flashing mode when the weather is cloudy & rainy. NiMH battery is a clean power source with no pollution. The NiMH battery is easy to obtain.


  • Ultra-light LEDs, energy saving
  • Self-contained without outside power supply
  • Maximum visibility distance 4 KM
  • Once fully charged, it can work for up to 200 hours
  • Auto-off after being packed for 18 hours
  • Either single light fails will not affect the other normal working
  • High-rise building marking
  • Telecom tower marking
  • Road obstruction marking
  • Navigation aid
  • Port, dock entrance & walkway
  • Buoy marking
  • Offshore gas & oil platform
  • ICAO : N/A
  • FAA : N/A
LIGHT OUT-PUT  
Nominal Night Range >4 KM
LED Color Available Red
Vertical Divergence 10 Degree
Horizontal Out-put 360 Degree
Illumination Ultra-bright LEDs
LED Lifespan 100,000 Hours
OPERATION
Autonomy 200 Hours
On & Off Level 70/100 Lux
Flash Pattern
70/100 Lux
Flash Pattern 40FPM default
Flash Pattern 40FPM default(can be preprogrammed to a specified flashing rate upon customer request)
POWER SUPPLY
Power Source Solar module, mono-crystalline silicon
Solar Efficiency 13.5%
Max. Power Out-put 1.8 Watts
Battery Type High-efficiency NiMH rechargeable battery
Battery Capacity 8 AH
Battery Replacement Yes, replaceable
MECHANICAL STRUCTURE
Lens Polycarbonate, UV Stabilize
Body Die-casting Aluminum
Water-proof IP67
Weight 4.5 KG
Temperature Range -40C˚ ~ +55C˚
Dimensions 215.5mm H, 226mm Diameter

We use Cookies - By using this site or closing this you agree to our Cookies policy.
Accept Cookies
x